Einleitung
The guide demonstrates how to replace a cooling fan for the Toshiba Satellite S50-B. You will need the Phillips #0 screwdriver and the plastic opening tool.
Was du brauchst
-
-
Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.
-
-
-
Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.
-
-
-
-
Locate the 10 screws on the bottom of the device, there should be 12 screws in total including the battery screws. Unscrew using a Phillips #0 screwdriver, and set screws aside.
-
Use a plastic opening tool to remove the bottom panel.
-
-
-
Locate the 2 screws on each fan. Unscrew them.
-
Disconnect the fan by applying gentle pressure to the circled connection with your finger and pulling.
-
Remove the fans. Be sure to keep track of the right and left fans, marked R and L.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
UC Santa Barbara, Team S1-G4, Weedon Fall 2017 Mitglied von UC Santa Barbara, Team S1-G4, Weedon Fall 2017
UCSB-WEEDON-F17S1G4
5 Mitglieder
4 Anleitungen geschrieben
