Zum Hauptinhalt wechseln

Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement

Was du brauchst

  1. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement, Valve: Schritt 1, Bild 1 von 1
    • Unscrew eight 6mm screws with Phillips head #1 screwdriver

    • Remove bottom cover

  2. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: Schritt 2, Bild 1 von 1
    • Unscrew three 6mm screws with Phillips head #1 screwdriver

    • Remover tube protection plate

  3. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: Schritt 3, Bild 1 von 2 Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: Schritt 3, Bild 2 von 2
    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

USF Tampa, Team S13-G69, Cagle Fall 2017 Mitglied von USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 Mitglieder

3 Anleitungen geschrieben

2 Kommentare

Where can I get the replacement water valve?

Mark Peters - Antwort

Anyone have a source for the valve?

ErrorCode67 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 12

Insgesamt: 1,897