Zum Hauptinhalt wechseln

Hoover Power Path Pro Advanced Power Switch Replacement

Was du brauchst

  1. Hoover Power Path Pro Advanced Power Switch Replacement, Power Switch: Schritt 1, Bild 1 von 1
    • Remove the lower brushroll from the bottom of the cleaner.

  2. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 2, Bild 1 von 1
    • Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

  3. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 3, Bild 1 von 2 Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 3, Bild 2 von 2
    • Pull the red handle to remove the front suction unit from the cleaner.

  4. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 4, Bild 1 von 1
    • Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

  5. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 5, Bild 1 von 2 Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 5, Bild 2 von 2
    • Push down on the handle release button. Lift the edge of top cover connected to this button.

    • Repeat the above step for the "On/Off" button.

    • Pull entire top cover off.

    • Caution: when pulling the handle release button, make sure the top of the cleaner does not fall.

  6. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 6, Bild 1 von 1
    • Remove the "On/Off" cap by pulling it upwards with caution.

  7. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 7, Bild 1 von 1
    • Use a long #2 Philips head to remove the two screws from the arched grey piece.

  8. Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 8, Bild 1 von 2 Hoover Power Path Pro Advanced Power Switch Replacement: Schritt 8, Bild 2 von 2
    • Pull out the red power the red power switch.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team S16-G5, Banghart Winter 2018 Mitglied von Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 Mitglieder

15 Anleitungen geschrieben

3 Kommentare

What is the part number?

martahayner - Antwort

Thanks so much!!

debmccrimm - Antwort

you have to test the switch, mine tested ok which led me to the fuse between the motor and switch. It was bad, parts warehouse part # 440004065 does the trick.

frank - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 25

Insgesamt: 3,503