Zum Hauptinhalt wechseln

Hoover T-Series WindTunnel Pet UH30310 Brush Replacement

Was du brauchst

  1. Hoover T-Series WindTunnel Pet UH30310 Brush Replacement, Brush: Schritt 1, Bild 1 von 2 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement, Brush: Schritt 1, Bild 2 von 2
    • Place the vacuum on its back.

    • On the bottom right side, push the red lever to the left.

    • Remove the plastic cover.

  2. Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 2, Bild 1 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 2, Bild 2 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 2, Bild 3 von 3
    • Grab the red switch under the brush and push left.

    • Then remove the plastic base plate.

  3. Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 3, Bild 1 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 3, Bild 2 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 3, Bild 3 von 3
    • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

  4. Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 4, Bild 1 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 4, Bild 2 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 4, Bild 3 von 3
    • Remove the two screws on the left side of the brush.

  5. Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 5, Bild 1 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 5, Bild 2 von 3 Hoover T-Series WindTunnel Pet UH30310 Brush Replacement: Schritt 5, Bild 3 von 3
    • Pull the clear plastic away from the head of the vacuum.

    • Slide the belt off the metal rod with your finger.

    • Pull the brush free.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Erik Ingels

Mitglied seit: 01/18/18

193 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team S12-G4, Banghart Winter 2018 Mitglied von Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 339