Zum Hauptinhalt wechseln

HP Pavilion Sleekbook 15-b000 Case Replacement

Was du brauchst

  1. HP Pavilion Sleekbook 15-b000 Case Replacement, Battery: Schritt 1, Bild 1 von 1
    • Unplug laptop from adapter and all other devices.

  2. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 2, Bild 1 von 1
    • Flip the laptop over with battery facing you.

  3. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 3, Bild 1 von 2 HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 3, Bild 2 von 2
    • Slide the battery lock on the right side open.

    • Slide the Battery release latch on the left side.

  4. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 4, Bild 1 von 1
    • Pull battery out.

  5. HP Pavilion Sleekbook 15-b000 Case Replacement, Keyboard: Schritt 5, Bild 1 von 1
    • Remove the two 6.5mm Phillips #1 keyboard screws from bottom of laptop.

  6. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 6, Bild 1 von 1
    • Push screwdriver through screw hole top pop the keyboard.

    • Make sure the screen is open.

  7. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 7, Bild 1 von 1
    • Pry up the keyboard.

    • The keyboard is still attached by it's ribbon.

  8. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 8, Bild 1 von 1
    • Remove keyboard wire by popping latch under blue plastic

  9. HP Pavilion Sleekbook 15-b000 Case Replacement, Case: Schritt 9, Bild 1 von 1
    • Using the spudger to lift up on the white tabs

    • Pull horizontally on the blue ribbon to disconnect the cables

  10. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 10, Bild 1 von 1
    • Remove the five 5.5mm Phillips #1 screws from the case

  11. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 11, Bild 1 von 1
    • Remove eight 6.5mm Phillips #1 screws from the back cover

  12. HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 12, Bild 1 von 3 HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 12, Bild 2 von 3 HP Pavilion Sleekbook 15-b000 Case Replacement: Schritt 12, Bild 3 von 3
    • Starting at a top corner, use the pry tool to split the case.

    • Slowly work around the case, pulling up gently to release the clips.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

USF Tampa, Team S11-G2, Cheng Spring 2018 Mitglied von USF Tampa, Team S11-G2, Cheng Spring 2018

USFT-CHENG-S18S11G2

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 5

Letzte 30 Tage: 11

Insgesamt: 446