Zum Hauptinhalt wechseln

DBPOWER T20 Speaker Replacement

Was du brauchst

  1. DBPOWER T20 Speaker Replacement, DBPOWER T20 Disassembly: Schritt 1, Bild 1 von 1
    • Flip the device and lay flat.

  2. DBPOWER T20 Speaker Replacement: Schritt 2, Bild 1 von 1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Speaker Replacement: Schritt 3, Bild 1 von 3 DBPOWER T20 Speaker Replacement: Schritt 3, Bild 2 von 3 DBPOWER T20 Speaker Replacement: Schritt 3, Bild 3 von 3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Speaker Replacement: Schritt 4, Bild 1 von 1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Speaker Replacement: Schritt 5, Bild 1 von 2 DBPOWER T20 Speaker Replacement: Schritt 5, Bild 2 von 2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Speaker Replacement: Schritt 6, Bild 1 von 3 DBPOWER T20 Speaker Replacement: Schritt 6, Bild 2 von 3 DBPOWER T20 Speaker Replacement: Schritt 6, Bild 3 von 3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Speaker Replacement: Schritt 7, Bild 1 von 2 DBPOWER T20 Speaker Replacement: Schritt 7, Bild 2 von 2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Speaker Replacement: Schritt 8, Bild 1 von 1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Speaker Replacement: Schritt 9, Bild 1 von 2 DBPOWER T20 Speaker Replacement: Schritt 9, Bild 2 von 2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Speaker Replacement: Schritt 10, Bild 1 von 2 DBPOWER T20 Speaker Replacement: Schritt 10, Bild 2 von 2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

  11. DBPOWER T20 Speaker Replacement, Speaker: Schritt 11, Bild 1 von 2 DBPOWER T20 Speaker Replacement, Speaker: Schritt 11, Bild 2 von 2
    • Remove the two (3 mm) screws connecting the bracket down and pull out the reflector, using a J0 Philips Head Screwdriver.

  12. DBPOWER T20 Speaker Replacement: Schritt 12, Bild 1 von 3 DBPOWER T20 Speaker Replacement: Schritt 12, Bild 2 von 3 DBPOWER T20 Speaker Replacement: Schritt 12, Bild 3 von 3
    • Slide the mirror straight up to remove.

  13. DBPOWER T20 Speaker Replacement: Schritt 13, Bild 1 von 3 DBPOWER T20 Speaker Replacement: Schritt 13, Bild 2 von 3 DBPOWER T20 Speaker Replacement: Schritt 13, Bild 3 von 3
    • Slide out the power source and disconnect its cables from the power jack and the light.

  14. DBPOWER T20 Speaker Replacement: Schritt 14, Bild 1 von 3 DBPOWER T20 Speaker Replacement: Schritt 14, Bild 2 von 3 DBPOWER T20 Speaker Replacement: Schritt 14, Bild 3 von 3
    • Remove the screws holding down the first speaker with a J0 screwdriver.

    • Remove the screws holding down the second speaker down.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Ryan Goldin

Mitglied seit: 02/15/18

245 Reputation

1 Anleitung geschrieben

Team

USF Tampa, Team S16-G2, Boczar Spring 2018 Mitglied von USF Tampa, Team S16-G2, Boczar Spring 2018

USFT-BOCZAR-S18S16G2

5 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 421