Zum Hauptinhalt wechseln

Dell Studio 1457 Hard Drive Replacement

Was du brauchst

  1. Dell Studio 1457 Hard Drive Replacement, Battery: Schritt 1, Bild 1 von 1
    • Slide the battery release latch until it clicks into place.

    • Slide the battery out of the battery bay.

  2. Dell Studio 1457 Hard Drive Replacement, Base Cover: Schritt 2, Bild 1 von 1
    • Turn the computer over and loosen the six captive screws on the base cover.

    • Lift the base cover off the computer.

  3. Dell Studio 1457 Hard Drive Replacement, Hard Drive: Schritt 3, Bild 1 von 1
    • Remove the two screws that secure the hard drive to the computer base.

    • Slide the hard drive away from the connector using the pull-tab.

  4. Dell Studio 1457 Hard Drive Replacement: Schritt 4, Bild 1 von 1
    • Tilt the hard drive by 45-degrees and lift it out of the computer base.

  5. Dell Studio 1457 Hard Drive Replacement: Schritt 5, Bild 1 von 1
    • Remove the four screws that secure the hard drive to the hard drive bracket.

    • Lift the hard drive off the hard drive bracket.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Mitglied seit: 02/28/18

44.820 Reputation

408 Anleitungen geschrieben

Team

RampUP America, Inc. Mitglied von RampUP America, Inc.

Community

42 Mitglieder

1.985 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 94