Repariere deine Sachen Community Store

Lorex A-MPX IR Bullet Camera Disassembly

Was du brauchst

  1. Lorex A-MPX IR Bullet Camera Disassembly, Quick look: Schritt 1, Bild 1 von 2 Lorex A-MPX IR Bullet Camera Disassembly, Quick look: Schritt 1, Bild 2 von 2

    • This little camera comes with the LHA4000 kit by Lorex.

    • It has a 4K sensor with motion sensor and infrared lights

    Übersetzen

  2. Lorex A-MPX IR Bullet Camera Disassembly, Removing the lense: Schritt 2, Bild 1 von 2 Lorex A-MPX IR Bullet Camera Disassembly, Removing the lense: Schritt 2, Bild 2 von 2

    • Remove the 4 screws holding down the camera lens. They are standard Philipps #1

    • Be careful not to pull the sensor as it is still attached to the signal cables.

    Übersetzen

  4. Lorex A-MPX IR Bullet Camera Disassembly, Camera Sensor: Schritt 3, Bild 1 von 3 Lorex A-MPX IR Bullet Camera Disassembly, Camera Sensor: Schritt 3, Bild 2 von 3 Lorex A-MPX IR Bullet Camera Disassembly, Camera Sensor: Schritt 3, Bild 3 von 3

    • The system board is directly attached to the back of the lens.

    • The connector is a simple 4 wires. This make it very easy to repair.

    Übersetzen

  5. Lorex A-MPX IR Bullet Camera Disassembly, Outer casing: Schritt 4, Bild 1 von 3 Lorex A-MPX IR Bullet Camera Disassembly, Outer casing: Schritt 4, Bild 2 von 3 Lorex A-MPX IR Bullet Camera Disassembly, Outer casing: Schritt 4, Bild 3 von 3

    • There is a rubber grommet that keep moisture away from the inside of the board.

    • There IS also this sillica pack inside the camera if moisture ever breach in.

    • The base is fixed to the feet using a single Phillips #1 screw

    • In order to separate the camera from the feet, you will need to undo the connector. The wires are thin so be careful.

    Übersetzen

  6. Lorex A-MPX IR Bullet Camera Disassembly, Whole assembly: Schritt 5, Bild 1 von 1

    • Very simple design for a very simple device. The whole assembly is held by 6 screws. Making it very easy to re-assemble.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 2 anderen Mitwirkenden

Hans

Mitglied seit: 10/20/14

1.920 Reputation

6 Anleitungen geschrieben

Auszeichnungen: 18

+ 15 weitere Auszeichnungen

Team

Mero IT Services Mitglied von Mero IT Services

Business

1 Mitglied

6 Anleitungen geschrieben

3 Kommentare

Can you do disassembly video on Lorex C861MB camera ?

Mark Curry - Antwort

Can you do a disassembly video on Lorex C861MB camera ?

Mark Curry - Antwort

How much is this camera

Michael Teeter - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 23

Insgesamt: 2,500