Zum Hauptinhalt wechseln

Power Macintosh G3 Blue and White Modem Replacement

Was du brauchst

  1. Power Macintosh G3 Blue and White Modem Replacement, Before opening up your Power Mac...: Schritt 1, Bild 1 von 1
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

  2. Power Macintosh G3 Blue and White Modem Replacement: Schritt 2, Bild 1 von 1
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  3. Power Macintosh G3 Blue and White Modem Replacement: Schritt 3, Bild 1 von 1
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

  4. Power Macintosh G3 Blue and White Modem Replacement: Schritt 4, Bild 1 von 1
    • Disconnect the modem’s flex cable from the connector on the logic board.

    • Lift the modem assembly out of it´s place on the logic board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

[deleted]

Mitglied seit: 08/28/18

26.328 Reputation

21 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 13

Insgesamt: 617