Zum Hauptinhalt wechseln

Disassembling Sanyo Katana Eclipse X Outer Casing

Was du brauchst

  1. Disassembling Sanyo Katana Eclipse X Outer Casing, Back Panel: Schritt 1, Bild 1 von 2 Disassembling Sanyo Katana Eclipse X Outer Casing, Back Panel: Schritt 1, Bild 2 von 2
    • Press the battery release button located on the back of the phone.

    • With the button depressed, pull down on the battery protector to remove it from the phone.

    • The phone's battery will now be exposed.

  2. Disassembling Sanyo Katana Eclipse X Outer Casing: Schritt 2, Bild 1 von 1
    • Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.

    • A small, flat-tip screwdriver or credit card may be helpful for this step.

    • The battery should now be free of the phone.

  3. Disassembling Sanyo Katana Eclipse X Outer Casing, Casing: Schritt 3, Bild 1 von 1
    • This task can be difficult. This phone has several specialized screws that are engineered to prevent removal.

    • With the battery removed, four (5.75mm) screws that hold the outer case together are visible (circled in picture).

  4. Disassembling Sanyo Katana Eclipse X Outer Casing: Schritt 4, Bild 1 von 1
    • Using your "Damaged Screw Remover", remove the screws from their current positions.

    • Once the screws are removed, the phone can be split apart.

    • You may need to wiggle the case a bit in order to get it loose

    • The case is now open.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Scott Kelley

Mitglied seit: 11/10/11

101 Reputation

1 Anleitung geschrieben

Team

University of Maine, Team 1-3, Diaz Fall 2012 Mitglied von University of Maine, Team 1-3, Diaz Fall 2012

UMAINE-DIAZ-F12S1G3

5 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 458