Vulcan Venture II VNB14002IE Motherboard Replacement

Einleitung

Use this guide to replace a faulty motherboard on your Vulcan Venture II (VNB14002IE) laptop. Your laptop may have a faulty motherboard if you experience frequent crashes, shutdowns, reboots or no power. Ensure your laptop is fully powered down before removing any part. If you're unsure that it's fully powered down, open and power the laptop and shut it down from the start menu.

Was du brauchst

Schritt 1 Back Panel

Vulcan Venture II VNB14002IE Motherboard Replacement, Back Panel: Schritt 1, Bild 1 von 1

Use a J00 screwdriver to unscrew the 10 back-plate screws.

Übersetzen

Schritt 2

Gently separate the back panel from the laptop.

Übersetzen

Schritt 3 Motherboard

Vulcan Venture II VNB14002IE Motherboard Replacement, Motherboard: Schritt 3, Bild 1 von 1

Disconnect the 4 ribbon cables connected to the motherboard by carefully lifting up the black bar attached to the housing. Slowly slide the cable out once released.
Disconnect the wire connected to the motherboard.
Disconnect the battery by gently pulling out the cable connected to the board.

Übersetzen

Schritt 4

Remove the screws located in the corners of the board using a J00 screwdriver.

Übersetzen

Schritt 5

Gently lift the board out of the housing without any cables still connected to the board.
Picture shows the housing of the motherboard after the motherboard has been removed.

Übersetzen