Zum Hauptinhalt wechseln

Nexus 4 Back Cover Replacement

Was du brauchst

  1. Nexus 4 Back Cover Replacement, Back Cover: Schritt 1, Bild 1 von 2 Nexus 4 Back Cover Replacement, Back Cover: Schritt 1, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    SIM Card Eject Tool
    $2.99
    Kaufen
    • Power off the phone, by long-pressing the power button and touching Power off.

    • Remove the SIM tray using the SIM Card Eject Tool.

    • This step is required in order to remove the back case.

  2. Nexus 4 Back Cover Replacement: Schritt 2, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    T5 Torx Screwdriver
    $5.49
    Kaufen
  3. Nexus 4 Back Cover Replacement: Schritt 3, Bild 1 von 3 Nexus 4 Back Cover Replacement: Schritt 3, Bild 2 von 3 Nexus 4 Back Cover Replacement: Schritt 3, Bild 3 von 3
    • Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.

    • The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

48 weitere Nutzer:innen haben diese Anleitung absolviert.

Kaitlyn Jones

Mitglied seit: 01/27/13

4.952 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 3-32, Amido Winter 2013 Mitglied von Cal Poly, Team 3-32, Amido Winter 2013

CPSU-AMIDO-W13S3G32

4 Mitglieder

8 Anleitungen geschrieben

3 Kommentare

I have made some rearrangement at this guide:

It more logic to remove the tray before removing the screws.

I have used some pictures from the teardown to clarify, particularly for showing the inside of the Nexus 4 showing the battery installed. The original picture did not show the battery. I have also made better reference to the tools.

Gaetan - Antwort

I ordered the back case using the provided link at etradesupply.com, and noticed it is not an original part: the wireless charging does not work at all (the coil has a much higher resistance than the original one). After insisting, they sent me another one, which gave the same result. Better avoid buying there if you expect original working products...

Doc Z - Antwort

What about the buttons and the NFC? I can buy a back cover with NFC included, but most seem to not have the buttons. Is it easy to remove the ones from the old cover and install them in the new cover?

Martin Fei - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 10

Letzte 30 Tage: 26

Insgesamt: 40,733