Zum Hauptinhalt wechseln

Audio Technica ATH-AD500 Speaker Assembly Replacement

Was du brauchst

  1. Audio Technica ATH-AD500 Speaker Assembly Replacement, Speaker Assembly: Schritt 1, Bild 1 von 1
    • Remove the ear pads by peeling them away from the grill.

  2. Audio Technica ATH-AD500 Speaker Assembly Replacement: Schritt 2, Bild 1 von 1
    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

  3. Audio Technica ATH-AD500 Speaker Assembly Replacement: Schritt 3, Bild 1 von 1
    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Melanie Reis

Mitglied seit: 01/11/13

227 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 17-19, Forte Winter 2013 Mitglied von Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Mitglieder

17 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 5

Letzte 30 Tage: 16

Insgesamt: 2,340