Zum Hauptinhalt wechseln

Fujifilm Finepix F10 6.3 MP Front cover Replacement

Was du brauchst

  1. Fujifilm Finepix F10 6.3 MP Front cover Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

  2. Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 2, Bild 1 von 1
    • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

  3. Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 3, Bild 1 von 1
    • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

  4. Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 4, Bild 1 von 3 Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 4, Bild 2 von 3 Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 4, Bild 3 von 3
    • Separate the front and back casing using the spudger.

    • Gently pull apart the two casings.

    • Pull the back casing away from the camera.

  5. Fujifilm Finepix F10 6.3 MP Front cover Replacement, Front cover: Schritt 5, Bild 1 von 1
    • Remove screws from motherboard using the Phillips 00 screwdriver.

    • Two 2.5 mm widehead Phillips screws

    • One 3.3 mm #00 Phillips screws

    • Three 2.5 mm #00 Phillips screws (black screws)

  6. Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 6, Bild 1 von 1
    • Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.

    • Remove 3.3 mm #00 Phillips screw from the side of the front screen.

  7. Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 7, Bild 1 von 2 Fujifilm Finepix F10 6.3 MP Front cover Replacement: Schritt 7, Bild 2 von 2
    • Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.

    • Do not be alarmed if it takes substantial pressure to separate the two.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Sarah Looper

Mitglied seit: 03/11/13

100 Reputation

7 Anleitungen geschrieben

Team

Clemson, Team 13-4, Benson Spring 2013 Mitglied von Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Mitglieder

16 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 5

Insgesamt: 856