Zum Hauptinhalt wechseln

Sanyo Katana Screen Protector Replacement

Was du brauchst

  1. Sanyo Katana Screen Protector Replacement, Screen Protector: Schritt 1, Bild 1 von 2 Sanyo Katana Screen Protector Replacement, Screen Protector: Schritt 1, Bild 2 von 2
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Sanyo Katana Screen Protector Replacement: Schritt 2, Bild 1 von 2 Sanyo Katana Screen Protector Replacement: Schritt 2, Bild 2 von 2
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  3. Sanyo Katana Screen Protector Replacement: Schritt 3, Bild 1 von 2 Sanyo Katana Screen Protector Replacement: Schritt 3, Bild 2 von 2
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

StephenYH

Mitglied seit: 03/11/13

20 Reputation

3 Anleitungen geschrieben

Team

Clemson, Team 12-1, Benson Spring 2013 Mitglied von Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 Mitglieder

20 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 305