Zum Hauptinhalt wechseln

Sanyo Katana Screen Replacement

Was du brauchst

  1. Sanyo Katana Screen Replacement, Screen Protector: Schritt 1, Bild 1 von 2 Sanyo Katana Screen Replacement, Screen Protector: Schritt 1, Bild 2 von 2
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Sanyo Katana Screen Replacement: Schritt 2, Bild 1 von 2 Sanyo Katana Screen Replacement: Schritt 2, Bild 2 von 2
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  3. Sanyo Katana Screen Replacement: Schritt 3, Bild 1 von 2 Sanyo Katana Screen Replacement: Schritt 3, Bild 2 von 2
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

  4. Sanyo Katana Screen Replacement, Front Case: Schritt 4, Bild 1 von 3 Sanyo Katana Screen Replacement, Front Case: Schritt 4, Bild 2 von 3 Sanyo Katana Screen Replacement, Front Case: Schritt 4, Bild 3 von 3
    • Use the spudger to pry off the front case from the left and right sides of the device.

    • Once it has popped off, pull the casing apart with fingers.

  5. Sanyo Katana Screen Replacement, Screen: Schritt 5, Bild 1 von 2 Sanyo Katana Screen Replacement, Screen: Schritt 5, Bild 2 von 2
    • Using a Tri-wing Y0 screwdriver, remove the 4.4mm screw.

    • Use fingers to remove the strip from the device.

  6. Sanyo Katana Screen Replacement: Schritt 6, Bild 1 von 3 Sanyo Katana Screen Replacement: Schritt 6, Bild 2 von 3 Sanyo Katana Screen Replacement: Schritt 6, Bild 3 von 3
    • Use a spudger to detach all of the connections to the motherboard in the back of the phone by the screen.

  7. Sanyo Katana Screen Replacement: Schritt 7, Bild 1 von 2 Sanyo Katana Screen Replacement: Schritt 7, Bild 2 von 2
    • Use the flat edge of the spudger to detach the screen from the phone casing.

    • Pull the screen up and away from the case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aliceann

Mitglied seit: 03/11/13

49 Reputation

1 Anleitung geschrieben

Team

Clemson, Team 12-1, Benson Spring 2013 Mitglied von Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 Mitglieder

20 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 612