Einleitung
Replace your faulty motherboard with a new one.
Was du brauchst
-
-
Remove the battery cover by applying pressure and sliding down the silver square on the back of the phone.
-
-
-
Remove the battery by prying under it with your finger or the plastic opening tool.
-
Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.
-
-
-
-
Unhook both sides of the white wire from the motherboard using the plastic opening tool from before
-
-
-
At the top of the phone, locate the gloss SATA cable strap connecting the LCD screen to the phone.
-
Using the prying tool, unattach this cable by levering under the connector
-
-
-
There will be two small clips on each side of the motherboard. Using the plastic opening tool unhook each clip one at a time
-
Once all four clips are unhooked you should be able to pull the motherboard from the casing using your hands.
-
After you remove the old motherboard, you can then replace it with a new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 13-64, Johann Spring 2013 Mitglied von Cal Poly, Team 13-64, Johann Spring 2013
CPSU-JOHANN-S13S13G64
4 Mitglieder
7 Anleitungen geschrieben
