Zum Hauptinhalt wechseln

Audiovox CR8030iE5 Top-Casing Replacement

Was du brauchst

  1. Audiovox CR8030iE5 Top-Casing Replacement, Top-Casing: Schritt 1, Bild 1 von 1
    • Turn the device upside down.

    • Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

  2. Audiovox CR8030iE5 Top-Casing Replacement: Schritt 2, Bild 1 von 1
    • Remove the four screws from the base using a Phillips #1 screwdriver.

  3. Audiovox CR8030iE5 Top-Casing Replacement: Schritt 3, Bild 1 von 1
    • Turn the device right-side up.

    • Gently pull the top panel off of the device.

  4. Audiovox CR8030iE5 Top-Casing Replacement: Schritt 4, Bild 1 von 1
    • Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

  5. Audiovox CR8030iE5 Top-Casing Replacement: Schritt 5, Bild 1 von 1
    • Pull back the board gently to avoid disconnecting the attached wires.

    • This allows you to view the soldered connections on the other side, and the internal components.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 10-39, Amido Spring 2013 Mitglied von Cal Poly, Team 10-39, Amido Spring 2013

CPSU-AMIDO-S13S10G39

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 320