Zum Hauptinhalt wechseln

Sony Clie PEG-NR70 Audio Module Replacement

Was du brauchst

  1. Sony Clie PEG-NR70 Audio Module Replacement, The Case: Schritt 1, Bild 1 von 1
    • Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.

    • It may be helpful to set up a piece of paper to keep track of where removed screws came from.

  2. Sony Clie PEG-NR70 Audio Module Replacement: Schritt 2, Bild 1 von 1
    • Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.

  3. Sony Clie PEG-NR70 Audio Module Replacement: Schritt 3, Bild 1 von 2 Sony Clie PEG-NR70 Audio Module Replacement: Schritt 3, Bild 2 von 2
    • Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.

    • Remove the back panel by lifting it away with your hands.

  4. Sony Clie PEG-NR70 Audio Module Replacement, Audio Module: Schritt 4, Bild 1 von 1
    • Unscrew the 2.5mm screw on the top portion of the audio module with a Phillips #00 screwdriver.

  5. Sony Clie PEG-NR70 Audio Module Replacement: Schritt 5, Bild 1 von 1
    • Remove the tape that is holding the module down.

  6. Sony Clie PEG-NR70 Audio Module Replacement: Schritt 6, Bild 1 von 1
    • Lift up the orange ribbon cable and unscrew the two 2.5mm screws located at the corners of the audio module with a Phillips #00 screwdriver.

  7. Sony Clie PEG-NR70 Audio Module Replacement: Schritt 7, Bild 1 von 1
    • Unplug the audio module from the motherboard by disconnecting the wires by lifting the orange wire up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Daniel Soski

Mitglied seit: 04/18/13

57 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 14-11, Maness Spring 2013 Mitglied von Cal Poly, Team 14-11, Maness Spring 2013

CPSU-MANESS-S13S14G11

5 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 562