Zum Hauptinhalt wechseln

Was du brauchst

Dieser Teardown ist keine Reparaturanleitung. Um dein NeXTstation zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. NeXTstation Teardown, NeXTstation Teardown: Schritt 1, Bild 1 von 3 NeXTstation Teardown, NeXTstation Teardown: Schritt 1, Bild 2 von 3 NeXTstation Teardown, NeXTstation Teardown: Schritt 1, Bild 3 von 3
    • The NeXTStation, this is a great addition to any computer collection.

  2. NeXTstation Teardown: Schritt 2, Bild 1 von 3 NeXTstation Teardown: Schritt 2, Bild 2 von 3 NeXTstation Teardown: Schritt 2, Bild 3 von 3
    • Turn the NeXTStation around, and remove this screw:

    • Then, lift the top cover of the computer. This will reveal the guts.

    • The ports from left to right: SCSI2, Keyboard & Mouse, DSP Port, DB-19(MegaPixel Display), DB-9(Serial), RJ-45(Ethernet), Coaxial (10b2 Ethernet), Power

    • I find notes in everything!

  3. NeXTstation Teardown: Schritt 3, Bild 1 von 2 NeXTstation Teardown: Schritt 3, Bild 2 von 2
    • Removing the hard drive:

    • The NeXTStation uses a 50-Pin SCSI Hard Drive up to 4GB.

    • Remove all of the cables from the logic board.

  4. NeXTstation Teardown: Schritt 4, Bild 1 von 3 NeXTstation Teardown: Schritt 4, Bild 2 von 3 NeXTstation Teardown: Schritt 4, Bild 3 von 3
    • Then remove this screw.

    • Once the screw is removed, pivot the drive up on a 45 Degree angle, then slide it out.

  5. NeXTstation Teardown: Schritt 5, Bild 1 von 1
    • The Hard Drive & Caddy

  6. NeXTstation Teardown: Schritt 6, Bild 1 von 3 NeXTstation Teardown: Schritt 6, Bild 2 von 3 NeXTstation Teardown: Schritt 6, Bild 3 von 3
    • Removing the floppy disk drive:

    • The NeXTStation uses a non-standard 2.88MB 3.5" floppy drive, though it uses the standard floppy connector.

    • Remove the floppy cable.

    • Then, remove this screw.

  7. NeXTstation Teardown: Schritt 7, Bild 1 von 3 NeXTstation Teardown: Schritt 7, Bild 2 von 3 NeXTstation Teardown: Schritt 7, Bild 3 von 3
    • Then, just like the hard drive, pivot the drive up 45 degrees, and pull it out.

  8. NeXTstation Teardown: Schritt 8, Bild 1 von 3 NeXTstation Teardown: Schritt 8, Bild 2 von 3 NeXTstation Teardown: Schritt 8, Bild 3 von 3
    • Removing the fan:

    • Remove this connector.

    • Remove these screws.

    • Remove the fan.

  9. NeXTstation Teardown: Schritt 9, Bild 1 von 3 NeXTstation Teardown: Schritt 9, Bild 2 von 3 NeXTstation Teardown: Schritt 9, Bild 3 von 3
    • Removing the logic board:

    • Remove the power supply connector. Just lift it straight up, and it should come free.

    • Remove this screw.

  10. NeXTstation Teardown: Schritt 10, Bild 1 von 3 NeXTstation Teardown: Schritt 10, Bild 2 von 3 NeXTstation Teardown: Schritt 10, Bild 3 von 3
    • Lift the end of the logic board(away from the ports), and slide it away from the ports.

    • Now, set the board aside.

  11. NeXTstation Teardown: Schritt 11, Bild 1 von 3 NeXTstation Teardown: Schritt 11, Bild 2 von 3 NeXTstation Teardown: Schritt 11, Bild 3 von 3
    • Power Supply:

    • Remove this screw.

    • Lift the power supply up, and out.

  12. NeXTstation Teardown: Schritt 12, Bild 1 von 1
    • The Logic Board Overview:

    • The Board has a 25Mhz Motorola 68040 CPU, This board features a ton of chips for something made nearly 20 years ago.

    • The CPU: Motorola XC68040RC25

    • The Co-Procesor: MB610313

    • Motorola Chips

    • Intel Chips

    • AMD Chips (Intel and AMD In the same computer?)

    • Fujitsu Chips

  13. NeXTstation Teardown: Schritt 13, Bild 1 von 3 NeXTstation Teardown: Schritt 13, Bild 2 von 3 NeXTstation Teardown: Schritt 13, Bild 3 von 3
    • Made in the USA, you don't see this anymore.

    • The Serial #

    • Looks like my NeXTStation came from WilTel.

    • It is model # N1100

Chris Green

Mitglied seit: 10/11/09

36.869 Reputation

49 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

322 Mitglieder

2.495 Anleitungen geschrieben

3 Kommentare

http://www.youtube.com/watch?v=jhfUKEu7s...

The Machine to Build the Machines:

Watch NeXT's revolutionary computer controlled (NeXT Cubes - no less) assembly line in action!

Juddy - Antwort

Zitat von Juddy:

http://www.youtube.com/watch?v=jhfUKEu7s... The Machine to Build the Machines: Watch NeXT's revolutionary computer controlled (NeXT Cubes - no less) assembly line in action!

Amazing!

Chris Green - Antwort

MB610313 - ICP (Integrated Channel Processor). Basically DMA on steroids for almost all of the main sub components of the system. I believe that the cube, or at least the 25Mhz 030/040 cubes, had two of these.

HotelCoralEssex - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 16

Letzte 30 Tage: 76

Insgesamt: 30,749