Was du brauchst
-
-
Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.
-
-
-
-
Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.
-
-
-
Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.
-
Remove the back panel by lifting it away with your hands.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.