Zum Hauptinhalt wechseln

Afridev Axle and Handle Replacement

Was du brauchst

  1. Afridev Axle and Handle Replacement, Head: Schritt 1, Bild 1 von 2 Afridev Axle and Handle Replacement, Head: Schritt 1, Bild 2 von 2
    • Assemble the required tools, including the Afridev tool and crescent wrenches.

  2. Afridev Axle and Handle Replacement: Schritt 2, Bild 1 von 3 Afridev Axle and Handle Replacement: Schritt 2, Bild 2 von 3 Afridev Axle and Handle Replacement: Schritt 2, Bild 3 von 3
    • Perform a water test on the pump, by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

  3. Afridev Axle and Handle Replacement: Schritt 3, Bild 1 von 2 Afridev Axle and Handle Replacement: Schritt 3, Bild 2 von 2
    • Loosen the bolt on front of the face plate with the Afridev tool.

    • Remove the plate from the pump by lifting it straight up.

  4. Afridev Axle and Handle Replacement, Axle and Handle: Schritt 4, Bild 1 von 3 Afridev Axle and Handle Replacement, Axle and Handle: Schritt 4, Bild 2 von 3 Afridev Axle and Handle Replacement, Axle and Handle: Schritt 4, Bild 3 von 3
    • Insert the T-handle into the top cylinder of the exposed pump rod.

  5. Afridev Axle and Handle Replacement: Schritt 5, Bild 1 von 2 Afridev Axle and Handle Replacement: Schritt 5, Bild 2 von 2
    • Loosen the 2 bolts on either side of handle.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

  6. Afridev Axle and Handle Replacement: Schritt 6, Bild 1 von 3 Afridev Axle and Handle Replacement: Schritt 6, Bild 2 von 3 Afridev Axle and Handle Replacement: Schritt 6, Bild 3 von 3
    • Loosen the 2 bolts on either side of the head to remove the handle from the pump rod.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

  7. Afridev Axle and Handle Replacement: Schritt 7, Bild 1 von 2 Afridev Axle and Handle Replacement: Schritt 7, Bild 2 von 2
    • Lift the handle to a horizontal position.

  8. Afridev Axle and Handle Replacement: Schritt 8, Bild 1 von 3 Afridev Axle and Handle Replacement: Schritt 8, Bild 2 von 3 Afridev Axle and Handle Replacement: Schritt 8, Bild 3 von 3
    • While one person lifts up on the T-handle, remove the bolt and connection pieces.

  9. Afridev Axle and Handle Replacement: Schritt 9, Bild 1 von 3 Afridev Axle and Handle Replacement: Schritt 9, Bild 2 von 3 Afridev Axle and Handle Replacement: Schritt 9, Bild 3 von 3
    • Remove the bolt and connection pieces from the handle.

    • Set the bolt pieces in a sanitary place, such as a bucket, to prevent contamination.

  10. Afridev Axle and Handle Replacement: Schritt 10, Bild 1 von 2 Afridev Axle and Handle Replacement: Schritt 10, Bild 2 von 2
    • Remove the handle from the pump.

    • Be sure to set the handle in a sanitary place to prevent contamination.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jake Devincenzi

Mitglied seit: 04/18/11

117.225 Reputation

57 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 10

Insgesamt: 554