Zum Hauptinhalt wechseln

Palm Treo 600 Back Case Replacement

Was du brauchst

  1. Palm Treo 600 Back Case Replacement, Back Case: Schritt 1, Bild 1 von 1
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Palm Treo 600 Back Case Replacement: Schritt 2, Bild 1 von 2 Palm Treo 600 Back Case Replacement: Schritt 2, Bild 2 von 2
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Palm Treo 600 Back Case Replacement: Schritt 3, Bild 1 von 2 Palm Treo 600 Back Case Replacement: Schritt 3, Bild 2 von 2
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 13-23, Maness Winter 2010 Mitglied von Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Mitglieder

16 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,688