Zum Hauptinhalt wechseln

Palm IIIx Front Button Cluster Replacement

Was du brauchst

  1. Palm IIIx Front Button Cluster Replacement, Battery: Schritt 1, Bild 1 von 1
    • Place the Palm IIIx face down on a flat surface.

  2. Palm IIIx Front Button Cluster Replacement: Schritt 2, Bild 1 von 1
    • Push down and lift up the battery cover to remove it.

  3. Palm IIIx Front Button Cluster Replacement: Schritt 3, Bild 1 von 1
    • Remove the old batteries one at a time.

  4. Palm IIIx Front Button Cluster Replacement, Front Button Cluster: Schritt 4, Bild 1 von 1
    • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

  5. Palm IIIx Front Button Cluster Replacement: Schritt 5, Bild 1 von 1
    • Hold the device on its side, positioning your hands as shown.

    • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers

  6. Palm IIIx Front Button Cluster Replacement: Schritt 6, Bild 1 von 1
    • Hold the screen and front cover in a vertical position, facing the screen inward, as shown.

    • Position your hands so you can push the screen outward with your thumbs.

    • Remove the front cover by gently pushing outward with your thumbs. Use your index fingers to pull back on the front cover.

  7. Palm IIIx Front Button Cluster Replacement: Schritt 7, Bild 1 von 1
    • Remove cluster by pulling on the rubber backing.

    • Clean, repair, and/or replace as neccessary.

Abschluss

To reassemble your device, follow these instructions in reverse order.

David Haskell

Mitglied seit: 01/21/10

44 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 14-43, Regan Winter 2010 Mitglied von Cal Poly, Team 14-43, Regan Winter 2010

CPSU-REGAN-W10S14G43

4 Mitglieder

4 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 1,332