Was du brauchst
-
-
Flip device upside down and remove the 4 foam pads at each corner.
-
-
-
-
Unscrew Circuit board attached to the top of the case with the one screw in the center. Be careful not to strip the screw/break the circuit board.
-
-
-
If everything works on the inside, that might mean you need a new circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.