Zum Hauptinhalt wechseln

Panasonic Toughbook CF-29 Back Cover Replacement

Was du brauchst

  1. Panasonic Toughbook CF-29 Back Cover Replacement, Battery: Schritt 1, Bild 1 von 1
    • Locate the bay door for the battery on the left side of the laptop.

  2. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 2, Bild 1 von 2 Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 2, Bild 2 von 2
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. Panasonic Toughbook CF-29 Back Cover Replacement, Optical Drive: Schritt 3, Bild 1 von 1
    • Flip the device upside down with the handle facing away from you.

    • Open the optical drive bay by sliding its latch to the right.

    • Locate optical drive release mechanism on the bottom of the laptop.

  4. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 4, Bild 1 von 1
    • Slide the latch cover to the right.

  5. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 5, Bild 1 von 2 Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 5, Bild 2 von 2
    • Push the exposed switch to the left to eject the optical drive.

  6. Panasonic Toughbook CF-29 Back Cover Replacement, Back Cover: Schritt 6, Bild 1 von 1
    • Begin by turning the laptop upside down with the handle towards you.

    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  7. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 7, Bild 1 von 1
    • Remove the panel and set it aside.

    • Use a Phillips size 0 screwdriver to remove these 8 small screws.

  8. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 8, Bild 1 von 1
    • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

  9. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 9, Bild 1 von 2 Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 9, Bild 2 von 2
    • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

  10. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 10, Bild 1 von 1
    • Be careful when lifting the cover as you may damage some connections.

    • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

  11. Panasonic Toughbook CF-29 Back Cover Replacement: Schritt 11, Bild 1 von 1
    • Now the back cover should be off and you can access the inside of the casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Rohun Heesen

Mitglied seit: 04/13/10

426 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 27-93, Amido Spring 2010 Mitglied von Cal Poly, Team 27-93, Amido Spring 2010

CPSU-AMIDO-S10S27G93

4 Mitglieder

26 Anleitungen geschrieben

Ein Kommentar

thanks for this crucial tuatorial >

Joe Gutierrez - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 19

Insgesamt: 10,040