Zum Hauptinhalt wechseln

Samsung SCH-A670 Screen Casing Replacement

Was du brauchst

  1. Samsung SCH-A670 Screen Casing Replacement, Battery Cover: Schritt 1, Bild 1 von 1
    • Slide the latch on the back of the phone up.

  2. Samsung SCH-A670 Screen Casing Replacement, Battery: Schritt 2, Bild 1 von 1
    • Remove the battery.

  3. Samsung SCH-A670 Screen Casing Replacement, Logic Board: Schritt 3, Bild 1 von 1
    • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

  4. Samsung SCH-A670 Screen Casing Replacement: Schritt 4, Bild 1 von 1
    • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

  5. Samsung SCH-A670 Screen Casing Replacement: Schritt 5, Bild 1 von 1
    • With a #0 Phillips screwdriver remove the screw which you just uncovered.

  6. Samsung SCH-A670 Screen Casing Replacement: Schritt 6, Bild 1 von 2 Samsung SCH-A670 Screen Casing Replacement: Schritt 6, Bild 2 von 2
    • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

    • Then disconnect the small power connector near the top of the phone.

  7. Samsung SCH-A670 Screen Casing Replacement: Schritt 7, Bild 1 von 1
    • Gently pry up the ribbon-type connector with the spudger.

  8. Samsung SCH-A670 Screen Casing Replacement: Schritt 8, Bild 1 von 1
    • Carefully pry the logic board from the case with the spudger.

  9. Samsung SCH-A670 Screen Casing Replacement, Keypad: Schritt 9, Bild 1 von 1
    • Once the logic board has been removed, peel the keypad up.

  10. Samsung SCH-A670 Screen Casing Replacement, Keypad Housing: Schritt 10, Bild 1 von 2 Samsung SCH-A670 Screen Casing Replacement, Keypad Housing: Schritt 10, Bild 2 von 2
    • When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.

  11. Samsung SCH-A670 Screen Casing Replacement, Screen Casing: Schritt 11, Bild 1 von 1
    • Remove screws with #0 Phillips screwdriver.

  12. Samsung SCH-A670 Screen Casing Replacement: Schritt 12, Bild 1 von 1
    • Carefully pry apart the casing with the spudger tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nathan Brink

Mitglied seit: 04/11/10

19 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 34-59, Forte Spring 2010 Mitglied von Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,921