Zum Hauptinhalt wechseln

Sony Cyber-shot DSC-W5 LCD Screen Replacement

Was du brauchst

  1. Sony Cyber-shot DSC-W5 LCD Screen Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Remove Memory Stick Pro from the card reader slot on the bottom of the camera.

    • Remove both batteries.

  2. Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 2, Bild 1 von 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 2, Bild 2 von 2
    • Remove the single visible screw from both sides of the camera.

    • Remove the two screws that are adjacent to the warning label, which is on the underside of the camera.

    • Do NOT remove all four screws from the bottom.

  3. Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 3, Bild 1 von 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 3, Bild 2 von 2
    • Gently remove the back cover from the camera.

    • The first time the case is removed, it will be stiff. Be patient and gently rock the cover back and forth until it slides free.

  4. Sony Cyber-shot DSC-W5 LCD Screen Replacement, LCD Screen: Schritt 4, Bild 1 von 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement, LCD Screen: Schritt 4, Bild 2 von 2
    • Remove the two screws holding the circuit board down.

  5. Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 5, Bild 1 von 1
    • Detach the orange cable from the board.

    • Use a thin object, like a paperclip, to gently pry the cable off the connector.

  6. Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 6, Bild 1 von 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 6, Bild 2 von 2
    • The LCD screen sits in two slots; one on the bottom, and one on the left edge.

    • Slide LCD screen from the two slots.

    • Do not attempt to completely remove the screen, as it is still attached to the camera.

  7. Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 7, Bild 1 von 3 Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 7, Bild 2 von 3 Sony Cyber-shot DSC-W5 LCD Screen Replacement: Schritt 7, Bild 3 von 3
    • To remove the LCD screen, detach the orange cable from the board.

    • If needed, replace the LCD screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Thomas

Mitglied seit: 04/14/10

133 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 15-50, Garner Spring 2010 Mitglied von Cal Poly, Team 15-50, Garner Spring 2010

CPSU-GARNER-S10S15G50

5 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 14

Insgesamt: 11,340