Zum Hauptinhalt wechseln

Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad

  1. Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Cover: Schritt 1, Bild 1 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Cover: Schritt 1, Bild 2 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Cover: Schritt 1, Bild 3 von 3
    • Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

    • Do not pull out the speaker clamp with too much force, or it may break.

    • After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

  2. Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 2, Bild 1 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 2, Bild 2 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 2, Bild 3 von 3
    • Repeat the process in Step 1 to remove the right speaker clamp.

  3. Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 3, Bild 1 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 3, Bild 2 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad: Schritt 3, Bild 3 von 3
    • Hold the speaker cover in one hand and the speaker ear-padding in the other.

    • Turn the speaker cover counter-clockwise until it stops turning.

    • Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

    • Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

    • If the speaker cover and ear-padding don't easily come apart, then make sure the speaker cover is fully turned.

    • Repeat this process for both speakers.

  4. Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Ear-Pad: Schritt 4, Bild 1 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Ear-Pad: Schritt 4, Bild 2 von 3 Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad, Speaker Ear-Pad: Schritt 4, Bild 3 von 3
    • After the speaker cover has been removed, hold the edge of the speaker ear-pad with fingers.

    • Gently pull the edge of the speaker ear-pad around the edge of the speaker.

    • To avoid tearing the speaker ear-pad, don't use too much force when pulling it around the edge of the speaker.

    • Repeat this process for the other speaker ear-padding.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Clemson, Team 1-3, Benson Spring 2014 Mitglied von Clemson, Team 1-3, Benson Spring 2014

CLEM-BENSON-S14S1G3

3 Mitglieder

18 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 8

Insgesamt: 890