Einleitung
After you remove the back cover, you can get to any part of your RoadMate.
Was du brauchst
-
-
Remove the four rubber caps from the back by using the Phillips #00 screwdriver.
-
-
-
Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.
-
-
-
-
Remove the back cover from the device by separating the back cover along its seam.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.