Zum Hauptinhalt wechseln

Canon EOS Rebel T1i Camera Battery Notch Replacement

Was du brauchst

  1. Canon EOS Rebel T1i Camera Battery Notch Replacement, Battery Notch: Schritt 1, Bild 1 von 2 Canon EOS Rebel T1i Camera Battery Notch Replacement, Battery Notch: Schritt 1, Bild 2 von 2
    • Locate the side of camera with the HDMI port.

    • Unscrew the 7mm with a #00 Phillips screw driver.

  2. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 2, Bild 1 von 2 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 2, Bild 2 von 2
    • Use your fingers to gently detach the plastic component from the camera

  3. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 3, Bild 1 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 3, Bild 2 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 3, Bild 3 von 3
    • Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver.

  4. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 4, Bild 1 von 1
    • Unscrew the inner 4mm screw with a #00 Phillips screwdriver.

  5. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 5, Bild 1 von 2 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 5, Bild 2 von 2
    • Unscrew the top 7mm screw on the right side of the camera.

    • Unscrew the bottom 4 mm screw on the right side of the camera.

  6. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 6, Bild 1 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 6, Bild 2 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 6, Bild 3 von 3
    • Use the plastic opening tool to pry open the entire back panel.

    • Use your fingers to pull off the back panel.

  7. Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 7, Bild 1 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 7, Bild 2 von 3 Canon EOS Rebel T1i Camera Battery Notch Replacement: Schritt 7, Bild 3 von 3
    • Now that the panel is off, unscrew the 9mm screw holding the battery notch in.

    • Use the pliers (or your fingers) to take off the white notch.

    • There is a spring underneath the battery notch. Do not lose this spring or let it fall off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Jonathan Lin

Mitglied seit: 04/14/14

548 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 3-41, Maness Spring 2014 Mitglied von Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 12

Insgesamt: 3,091