Zum Hauptinhalt wechseln

Sony Vaio VGN-SZ120P Optical Drive Replacement

Was du brauchst

  1. Sony Vaio VGN-SZ120P Optical Drive Replacement, Battery: Schritt 1, Bild 1 von 1
    • Set the computer display-side down.

    • Unlock the battery by sliding the port-side latch to the 'unlock' position.

  2. Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 2, Bild 1 von 1
    • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

  3. Sony Vaio VGN-SZ120P Optical Drive Replacement, Keyboard: Schritt 3, Bild 1 von 1
    • Ignore the removal of the heat sink and memory panels as depicted. They do not need to be removed for the completion of this guide.

    • Remove the Torx security screw near the center of the battery-side edge.

  4. Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 4, Bild 1 von 2 Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 4, Bild 2 von 2
    • Press the tabs on each side of the display-side of the keyboard with the flat edge of a spudger.

    • Pull the keyboard toward the mouse pad and gently lift up.

  5. Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 5, Bild 1 von 2 Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 5, Bild 2 von 2
    • The keyboard is still attached by ribbon cable, don't try to remove the keyboard entirely yet.

    • Disconnect the ribbon cable by pressing the tabs on either side of the connector. Pull the cable out parallel to the connector.

    • Remove the keyboard.

  6. Sony Vaio VGN-SZ120P Optical Drive Replacement, Mouse Assembly: Schritt 6, Bild 1 von 1
    • Turn the laptop upside down.

    • Remove the three screws from the front mouse panel located on the bottom of the laptop.

    • Carefully flip the laptop back over. Remove three more screws from the top securing the panel. A ribbon cable will still be attached to the panel when you remove it.

  7. Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 7, Bild 1 von 2 Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 7, Bild 2 von 2
    • Lift the mouse assembly just enough to access the connecting ribbon cable.

    • Lift the ribbon cable lock to remove the cable.

    • Carefully remove the mouse panel assembly and set aside.

  8. Sony Vaio VGN-SZ120P Optical Drive Replacement, Optical Drive: Schritt 8, Bild 1 von 1
    • Remove the securing screw on the bottom left of the optical drive.

  9. Sony Vaio VGN-SZ120P Optical Drive Replacement: Schritt 9, Bild 1 von 1
    • Carefully slide the optical drive out right.

    • The IDE connector on the left will pop out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

David Hoyt

Mitglied seit: 04/09/10

4.023 Reputation

43 Anleitungen geschrieben

Team

Cal Poly, Team 25-89, Amido Spring 2010 Mitglied von Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Mitglieder

63 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 5,331