Zum Hauptinhalt wechseln

Samsung L100 flash assembly replacement

Was du brauchst

  1. Samsung L100 flash assembly replacement, Removing Back Cover: Schritt 1, Bild 1 von 3 Samsung L100 flash assembly replacement, Removing Back Cover: Schritt 1, Bild 2 von 3 Samsung L100 flash assembly replacement, Removing Back Cover: Schritt 1, Bild 3 von 3
    • Remove the six external screws from the camera using a Phillips #0 screwdriver.

    • After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.

    • Be careful, make sure you don't lose the screws.

  2. Samsung L100 flash assembly replacement: Schritt 2, Bild 1 von 2 Samsung L100 flash assembly replacement: Schritt 2, Bild 2 von 2
    • Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

  3. Samsung L100 flash assembly replacement: Schritt 3, Bild 1 von 3 Samsung L100 flash assembly replacement: Schritt 3, Bild 2 von 3 Samsung L100 flash assembly replacement: Schritt 3, Bild 3 von 3
    • Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

  4. Samsung L100 flash assembly replacement: Schritt 4, Bild 1 von 1
    • Carefully squeeze the top right corner of the camera and pry off the external cover.

    • If you hear a "cracking" sound. This is normal.

    • Continue to pull the external cover and it will come off cleanly.

    • Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

  5. Samsung L100 flash assembly replacement: Schritt 5, Bild 1 von 1
    • Carefully pull off the back cover, parts behind the back of the case might fall out.

  6. Samsung L100 flash assembly replacement, Flash Circuit Board: Schritt 6, Bild 1 von 1
    • Remove the screws holding the circuit board.

    • After you remove the screws, carefully remove the circuit board.

  7. Samsung L100 flash assembly replacement: Schritt 7, Bild 1 von 2 Samsung L100 flash assembly replacement: Schritt 7, Bild 2 von 2
    • Remove the front cover, it comes off easily.

    • Buttons might fall out when you remove the front cover.

  8. Samsung L100 flash assembly replacement: Schritt 8, Bild 1 von 1
    • Face camera towards you.

    • Remove the two screws from circuit board on the left side of the lens.

  9. Samsung L100 flash assembly replacement: Schritt 9, Bild 1 von 1
    • Carefully hold up the circuit board, while it's still connected to the camera.

    • Remove all five screws that's on top of the camera.

  10. Samsung L100 flash assembly replacement: Schritt 10, Bild 1 von 3 Samsung L100 flash assembly replacement: Schritt 10, Bild 2 von 3 Samsung L100 flash assembly replacement: Schritt 10, Bild 3 von 3
    • Carefully push up the top of the circuit board.

    • Pull up flash circuit board from top of camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Adriel

Mitglied seit: 04/15/10

123 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 6-17, Maness Spring 2010 Mitglied von Cal Poly, Team 6-17, Maness Spring 2010

CPSU-MANESS-S10S6G17

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 4,003