Zum Hauptinhalt wechseln

Canon PowerShot SD500 Digital ELPH Shutter Button Replacement

Was du brauchst

  1. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement, Battery: Schritt 1, Bild 1 von 1
    • Slide open the battery cover.

    • Push the small orange tab to the side so the battery can be removed.

  2. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 2, Bild 1 von 2 Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 2, Bild 2 von 2
    • Slide the battery out of the battery compartment.

  3. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement, Front and Rear Casing: Schritt 3, Bild 1 von 2 Canon PowerShot SD500 Digital ELPH Shutter Button Replacement, Front and Rear Casing: Schritt 3, Bild 2 von 2
    • Two Phillips screws need to be removed using a #00 Phillips screwdriver. The upper screw is under the USB port cover, which can simply be pulled away gently from the casing. the lower screw is visible on the panel.

    • The screws are different sizes. The .125 inch screw is located under the USB port cover. The 0.85 inch screw goes in the lower hole on the panel.

    • When looking at the back of the camera, these two screws are on the right panel of the camera.

  4. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 4, Bild 1 von 1
    • Remove the right side cover from the camera casing.

  5. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 5, Bild 1 von 1
    • Remove a .07 inch Phillips screw using a #00 Phillips screwdriver.

  6. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 6, Bild 1 von 1
    • Remove two .085 inch Phillips screws from the left side of the camera using a #00 Philips screwdriver.

  7. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 7, Bild 1 von 1
    • Remove the left side cover from the camera.

  8. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 8, Bild 1 von 1
    • Remove three .15 inch Phillips screws from the bottom of the camera using a #00 Phillips screwdriver.

  9. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 9, Bild 1 von 2 Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 9, Bild 2 von 2
    • Once the casing is unscrewed, hold the camera with one side facing down, and lift the opposite face of the casing to open it.

    • Remove the internal camera components and layout out all pieces on a clean surface.

    • The front and back cover may require gentle rocking to remove.

  10. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement, Shutter Button: Schritt 10, Bild 1 von 1
    • Unscrew one .235 inch long Phillips screw using a #00 Phillips screwdriver from the top of the camera.

  11. Canon PowerShot SD500 Digital ELPH Shutter Button Replacement: Schritt 11, Bild 1 von 1
    • Gently remove the shutter button unit from the rest of the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Taylor Shields

Mitglied seit: 10/13/14

846 Reputation

8 Anleitungen geschrieben

Team

Clemson, Team 2-1, Benson Fall 2014 Mitglied von Clemson, Team 2-1, Benson Fall 2014

CLEM-BENSON-F14S2G1

4 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 137