Zum Hauptinhalt wechseln

Sun King Solo Solar Lantern Hand Strap Replacement

Was du brauchst

  1. Sun King Solo Solar Lantern Hand Strap Replacement, Locate and Remove the Screws: Schritt 1, Bild 1 von 1
    • Place the lamp LED side down on a clean workspace.

    • Remove the screws holding the casing together using a Phillips #1 Screwdriver.

  2. Sun King Solo Solar Lantern Hand Strap Replacement, Separate the Device: Schritt 2, Bild 1 von 1
    • Gently pull the two halves of the lamp apart.

  3. Sun King Solo Solar Lantern Hand Strap Replacement, Remove Strap: Schritt 3, Bild 1 von 1
    • Remove both ends of the strap from the orange casing by pulling up.

  4. Sun King Solo Solar Lantern Hand Strap Replacement, Replace the Strap: Schritt 4, Bild 1 von 1
    • Insert the ends of the new strap into the strap housing on both sides of the orange component.

    • Either strap housing (inner or outer) can be used to adjust the strap length.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Anna

Mitglied seit: 10/23/14

595 Reputation

4 Anleitungen geschrieben

Team

Michigan Tech, Team 1-3, Lauer Fall 2014 Mitglied von Michigan Tech, Team 1-3, Lauer Fall 2014

MTU-LAUER-F14S1G3

3 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 300