Zum Hauptinhalt wechseln

Planet Eclipse Etha Battery and Grip Panels Replacement

Was du brauchst

  1. Planet Eclipse Etha Battery and Grip Panels Replacement, Battery and Grip Panels: Schritt 1, Bild 1 von 2 Planet Eclipse Etha Battery and Grip Panels Replacement, Battery and Grip Panels: Schritt 1, Bild 2 von 2
    • Use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

    • If you are only replacing the battery, skip the next step.

    • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

  2. Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 2, Bild 1 von 1
    • Flip the marker over and use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

  3. Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 3, Bild 1 von 2 Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 3, Bild 2 von 2
    • Carefully remove the 9V battery and connector.

    • Remove the 9V battery from the connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jared Olson

Mitglied seit: 10/14/14

211 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 10-42, Amido Fall 2014 Mitglied von Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 5

Insgesamt: 1,182