Einleitung
If your phone's camera is not working properly and need replacement, follow these steps to guide you through the replacement process.
Was du brauchst
-
-
Set the phone screen down on a clean flat, surface.
-
Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.
-
Open the back of the device by prying around the sides of the back panel using the plastic opening tool.
-
-
-
Insert the plastic opening tool in between the battery and the phone body.
-
Pry up on the side of battery, and remove it.
-
-
-
Remove the bottom cover of the phone using the plastic opening tool.
-
-
-
-
Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.
-
-
-
Use the tweezers to detach the flex cable to remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.