Zum Hauptinhalt wechseln

Oculus Rift DK1 Control Box Bottom Cover Replacement

Was du brauchst

  1. Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: Schritt 1, Bild 1 von 3 Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: Schritt 1, Bild 2 von 3 Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: Schritt 1, Bild 3 von 3
    • Use a plastic opening tool to carefully pry off the four rubber feet from the control box.

    • You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.

  2. Oculus Rift DK1 Control Box Bottom Cover Replacement: Schritt 2, Bild 1 von 3 Oculus Rift DK1 Control Box Bottom Cover Replacement: Schritt 2, Bild 2 von 3 Oculus Rift DK1 Control Box Bottom Cover Replacement: Schritt 2, Bild 3 von 3
    • Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box.

    • You can now remove the bottom lid of the control box. It should come apart easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Audrey Chan

Mitglied seit: 01/12/15

201 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 70-5, Forte Winter 2015 Mitglied von Cal Poly, Team 70-5, Forte Winter 2015

CPSU-FORTE-W15S70G5

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 414