Zum Hauptinhalt wechseln

Optoma HD20 Light Bulb Replacement

Was du brauchst

  1. Optoma HD20 Light Bulb Replacement, Rear Panel: Schritt 1, Bild 1 von 2 Optoma HD20 Light Bulb Replacement, Rear Panel: Schritt 1, Bild 2 von 2
    • Use a Phillips #1 screwdriver to loosen the screws that secure the panel on the bottom of the Optoma HD20.

  2. Optoma HD20 Light Bulb Replacement: Schritt 2, Bild 1 von 1
    • Lift the panel off of the device.

  3. Optoma HD20 Light Bulb Replacement, Light Bulb Casing: Schritt 3, Bild 1 von 1
    • Use a Phillips #1 screwdriver to loosen the two screws securing the black casing.

    • The screws don't come out all the way.

  4. Optoma HD20 Light Bulb Replacement: Schritt 4, Bild 1 von 3 Optoma HD20 Light Bulb Replacement: Schritt 4, Bild 2 von 3 Optoma HD20 Light Bulb Replacement: Schritt 4, Bild 3 von 3
    • Remove the light bulb casing from the device.

    • Steps 5-9 are unnecessary if the replacement light bulb comes with housing.

  5. Optoma HD20 Light Bulb Replacement, Light Bulb: Schritt 5, Bild 1 von 1
    • Remove the three 4.5 mm screws on the light bulb case.

  6. Optoma HD20 Light Bulb Replacement: Schritt 6, Bild 1 von 1
    • Carefully remove the light bulb insulator from the light bulb casing.

  7. Optoma HD20 Light Bulb Replacement: Schritt 7, Bild 1 von 1
    • Gently pull the wires off of the pins using tweezers.

  8. Optoma HD20 Light Bulb Replacement: Schritt 8, Bild 1 von 1
    • Remove the 4 screws on the back of the light bulb casing using a Phillips #1 screwdriver.

  9. Optoma HD20 Light Bulb Replacement: Schritt 9, Bild 1 von 2 Optoma HD20 Light Bulb Replacement: Schritt 9, Bild 2 von 2
    • Remove the casing, then gently pull out the old light bulb and replace it with the new one.

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Trever

Mitglied seit: 01/22/15

1.264 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 21-23, Maness Winter 2015 Mitglied von Cal Poly, Team 21-23, Maness Winter 2015

CPSU-MANESS-W15S21G23

4 Mitglieder

6 Anleitungen geschrieben

5 Kommentare

I recently replaced my bulb for the third time and the insulator had grown brittle I am guessing from the heat and it broke. I can't seem to find this part for sale anywhere. Does anyone know if is possible to purchase it?

Thomas - Antwort

The screws in step 8 are extremely hard to get off. I went and bought proper screwdrivers before even attempting since theyre small, but in a day I've only managed to get one off and I'm having to resort to other tactics, even using a drill to just grind the heads off.

dv01_ - Antwort

king@okinlamps.com

Need LAD60 20PCS

kingshen92 - Antwort

The manual says the new light won’t come back on until a lamp reset I’d done via menu , but how can you see the text if the light isn’t on?????

Taringajohn - Antwort

my hd 20 projects dull images i recently replaced my bulb for the first time successfully and i followed as per menu trying to bulb reset but it is not working and still image is dull how to solve the problem

kumar - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 9

Letzte 30 Tage: 48

Insgesamt: 11,374