Zum Hauptinhalt wechseln

Eclipse 180G2 Outer Case Replacement

Was du brauchst

  1. Eclipse 180G2 Outer Case Replacement, Outer Case: Schritt 1, Bild 1 von 2 Eclipse 180G2 Outer Case Replacement, Outer Case: Schritt 1, Bild 2 von 2
    • Remove the two screws on the bottom of the device with a Phillips head screwdriver.

    • Use a spudger to remove the plastic plate from the bottom of the player.

  2. Eclipse 180G2 Outer Case Replacement, Remove inner circuit from case shell: Schritt 2, Bild 1 von 3 Eclipse 180G2 Outer Case Replacement, Remove inner circuit from case shell: Schritt 2, Bild 2 von 3 Eclipse 180G2 Outer Case Replacement, Remove inner circuit from case shell: Schritt 2, Bild 3 von 3
    • Hold the device firmly between two fingers. Be sure you aren't holding down the top of the device; the circuit board will slide out of the shell through that end.

    • Use the spudger to push the USB port on the bottom of the device inward.

    • The plastic LCD cover and the key pad will now be free; they were held in place by the tension between the case and the internal circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Jesse Minor

Mitglied seit: 01/15/15

662 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team 1-4, Tanski Winter 2015 Mitglied von USF Tampa, Team 1-4, Tanski Winter 2015

USFT-TANSKI-W15S1G4

4 Mitglieder

5 Anleitungen geschrieben

Ein Kommentar

What if there is no charge port or USB port there no longer?

May 303 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 1,326