Zum Hauptinhalt wechseln

Replacing Creative Zen X-Fi Battery

Was du brauchst

  1. Replacing Creative Zen X-Fi Battery, Detaching Front Case: Schritt 1, Bild 1 von 3 Replacing Creative Zen X-Fi Battery, Detaching Front Case: Schritt 1, Bild 2 von 3 Replacing Creative Zen X-Fi Battery, Detaching Front Case: Schritt 1, Bild 3 von 3
    • Using a spudger, wedge the tip between the front and back case to pry them apart.

    • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

  2. Replacing Creative Zen X-Fi Battery, Rubber Button Cover: Schritt 2, Bild 1 von 1
    • The black rubber button pad can be removed by simply picking it up.

  3. Replacing Creative Zen X-Fi Battery, Button Input Chip Part 1: Schritt 3, Bild 1 von 1
    • Flip the LCD screen off the midsection plate to gain access to the space around the input button chip.

  4. Replacing Creative Zen X-Fi Battery, Button Input Chip: Schritt 4, Bild 1 von 1
    • Using a spudger, pry off the button input chip from the mid-section of the device. To gain best leverage, start at the bottom right corner and level your way up the side of the chip.

    • Be aware that the button input chip is glued to the mid-section, so some extra force may be required.

  5. Replacing Creative Zen X-Fi Battery, Access Midsection Plate: Schritt 5, Bild 1 von 1
    • Lift open the LCD screen and button input chip to access the entire midsection plate.

  6. Replacing Creative Zen X-Fi Battery, Unscrew below Button Chip: Schritt 6, Bild 1 von 1
    • Use a Phillips Head screwdriver to unscrew the three 3/16 inch screws that were underneath the button input chip.

  7. Replacing Creative Zen X-Fi Battery, Unscrew below LCD Screen: Schritt 7, Bild 1 von 1
    • Use a Phillips Head screwdriver to unscrew the three 3/16 inch screws that were underneath the LCD screen.

  8. Replacing Creative Zen X-Fi Battery, Separating the Battery: Schritt 8, Bild 1 von 1
    • Use a spudger to pry the battery from the midsection plate.

    • There is adhesive glue underneath the battery, so additional force might be required to separate the battery.

  9. Replacing Creative Zen X-Fi Battery, Disconnecting Power Supply: Schritt 9, Bild 1 von 2 Replacing Creative Zen X-Fi Battery, Disconnecting Power Supply: Schritt 9, Bild 2 von 2
    • Locate the soldering joint connecting the battery wires to the power supply, marked by the letters "PS" on the motherboard.

    • Hold the battery wires in place so that access to the soldering joints is not blocked.

    • When using a soldering iron, keep your hands and fingers as far as possible from the iron's tip to avoid burning your skin.

    • Using a soldering iron, melt the solder connecting the red wire to the motherboard. Do the same action to the black wire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Westley Courchene

Mitglied seit: 01/13/15

3.362 Reputation

14 Anleitungen geschrieben

Team

USF Tampa, Team 1-1, Remmell Fall 2015 Mitglied von USF Tampa, Team 1-1, Remmell Fall 2015

USFT-REMMELL-F15S1G1

5 Mitglieder

14 Anleitungen geschrieben

Ein Kommentar

very clear pictures!

John - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 12

Letzte 30 Tage: 50

Insgesamt: 6,587