Zum Hauptinhalt wechseln

Asus X200MA Fan Replacement

Was du brauchst

  1. Asus X200MA Fan Replacement, Back Panel: Schritt 1, Bild 1 von 1
    • Remove the following six screws:

    • Six 4 mm screws using a Phillips #0 screwdriver.

    • Remove the following one screw:

    • One 14 mm screw using a Phillips #0 screwdriver.

    • The 14mm screw goes in the center.

  2. Asus X200MA Fan Replacement: Schritt 2, Bild 1 von 1
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

  3. Asus X200MA Fan Replacement, Battery: Schritt 3, Bild 1 von 1
    • Take two rubber caps off the back side of the laptop.

  4. Asus X200MA Fan Replacement: Schritt 4, Bild 1 von 1
    • Remove the following two screws under the rubber caps.

    • Two 14 mm screws using the Phillips #0 screw driver.

  5. Asus X200MA Fan Replacement: Schritt 5, Bild 1 von 1
    • Flip up the following:

    • The two latches holding the two cables shown(white and black)

    • Pull the cables free from the latches

    • Lift the keyboard from the computer

  6. Asus X200MA Fan Replacement: Schritt 6, Bild 1 von 1
    • Remove the following screws from the inside of the laptop:

    • Two 4 mm screws using the Phillips #0 phillips screwdriver.

    • One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

  7. Asus X200MA Fan Replacement: Schritt 7, Bild 1 von 1
    • Slide the battery up and out.

  8. Asus X200MA Fan Replacement, Fan: Schritt 8, Bild 1 von 1
    • Remove the Two 4 mm screws using Phillips #0 phillips screwdriver.

  9. Asus X200MA Fan Replacement: Schritt 9, Bild 1 von 2 Asus X200MA Fan Replacement: Schritt 9, Bild 2 von 2
    • Unplug the set of wires located at bottom corner on fan.

  10. Asus X200MA Fan Replacement: Schritt 10, Bild 1 von 2 Asus X200MA Fan Replacement: Schritt 10, Bild 2 von 2
    • Lift up and out to completely the remove fan component.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Vanessa Garcia

Mitglied seit: 01/22/15

1.763 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 21-24, Maness Winter 2015 Mitglied von Cal Poly, Team 21-24, Maness Winter 2015

CPSU-MANESS-W15S21G24

4 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 6

Insgesamt: 2,366