Zum Hauptinhalt wechseln

Disassembling Optoma HD20 Cover

Was du brauchst

  1. Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: Schritt 1, Bild 1 von 2 Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: Schritt 1, Bild 2 von 2
    • Twist the focal cap clockwise until it is fully extended.

    • Remove the focal cap by pulling it straight out.

  2. Disassembling Optoma HD20 Cover: Schritt 2, Bild 1 von 1
    • Use a Phillips #1 screwdriver to remove the three 7.5mm screws on the bottom of the device.

  3. Disassembling Optoma HD20 Cover: Schritt 3, Bild 1 von 1
    • Use a plastic opening tool to gently pry the top cover off of the device.

    • It is easier to pry off the cover from the back side just above the HDMI ports.

  4. Disassembling Optoma HD20 Cover: Schritt 4, Bild 1 von 1
    • When removing the cover, be cautious of the ribbon connecting the top buttons to the main circuit board. The ribbon must be disconnected before proceeding.

    • Remove the ribbon by disconnecting it from the main circuit board.

    • Lift up the clip holding it down and pull the ribbon out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Trever

Mitglied seit: 01/22/15

1.264 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 21-23, Maness Winter 2015 Mitglied von Cal Poly, Team 21-23, Maness Winter 2015

CPSU-MANESS-W15S21G23

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 16

Insgesamt: 3,026