Einleitung
This guide will allow you how to access the internal components of the device.
Was du brauchst
-
-
Flip the device to the backside, and locate the metal tab at the center of the back cover.
-
-
-
Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.
-
-
-
-
With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.
-
-
-
With the pick side of a spudger (or tweezers), peel the sticky tape from the device.
-
-
-
Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.
-
-
-
With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.