Zum Hauptinhalt wechseln

HP Pavilion dv6000 Wireless Card Replacement

Was du brauchst

  1. HP Pavilion dv6000 Wireless Card Replacement, Wireless Card: Schritt 1, Bild 1 von 1
    • Lay the laptop on a flat surface, battery side up.

    • Remove the two screws securing the RAM shield to the lower case.

    • The screws will remain captive within the shield.

    • Lift and remove the RAM shield up from the lower case.

  2. HP Pavilion dv6000 Wireless Card Replacement: Schritt 2, Bild 1 von 2 HP Pavilion dv6000 Wireless Card Replacement: Schritt 2, Bild 2 von 2
    • Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

    • Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

  3. HP Pavilion dv6000 Wireless Card Replacement: Schritt 3, Bild 1 von 1
    • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

    • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

    • Grasp the wireless card and pull it straight out of its socket on the motherboard.

  4. HP Pavilion dv6000 Wireless Card Replacement: Schritt 4, Bild 1 von 1
    • Wireless card remains.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Ben Hirsch

Mitglied seit: 10/05/10

3.826 Reputation

10 Anleitungen geschrieben

Team

Cal Poly, Team 21-33, Regan Fall 2010 Mitglied von Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 26,661