Zum Hauptinhalt wechseln

Canon PowerShot A590 IS Clock Battery Replacement

Was du brauchst

  1. Canon PowerShot A590 IS Clock Battery Replacement, Batteries: Schritt 1, Bild 1 von 2 Canon PowerShot A590 IS Clock Battery Replacement, Batteries: Schritt 1, Bild 2 von 2
    • The battery hatch is on the bottom of the camera.

    • CAUTION: Locate the switch to open the hatch and push gently toward the front of the camera. Too much force can break the hatch.

    • While the switch is pushed forward, pull the cover away from the camera.

  2. Canon PowerShot A590 IS Clock Battery Replacement: Schritt 2, Bild 1 von 1
    • This camera requires AA batteries.

    • To remove batteries, simply allow them to fall out of the camera.

    • Use a fingernail to lift the clock battery out of the camera.

  3. Canon PowerShot A590 IS Clock Battery Replacement: Schritt 3, Bild 1 von 1
    • When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.

  4. Canon PowerShot A590 IS Clock Battery Replacement, Locate Clock Battery: Schritt 4, Bild 1 von 1
    • To access the clock battery, find the clock battery cover, shown here in the red square.

  5. Canon PowerShot A590 IS Clock Battery Replacement, Remove Battery Tab: Schritt 5, Bild 1 von 1
    • When accessing the clock battery, use a fingernail or similar small instrument to gently pull the tab out.

  6. Canon PowerShot A590 IS Clock Battery Replacement, Remove Battery from Tab: Schritt 6, Bild 1 von 1
    • Now that you have the tab and battery removed, use a fingernail or other small tool to remove the battery from the tab.

    • This battery is a CR1220 type watch battery.

  7. Canon PowerShot A590 IS Clock Battery Replacement, Replacing Clock Battery: Schritt 7, Bild 1 von 1
    • When replacing the clock battery, be sure to have the battery oriented properly, as shown in the picture.

    • Remember, the tab goes in with the exposed side of the battery facing towards the lens.

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer:innen haben diese Anleitung absolviert.

Matt Wolfe

Mitglied seit: 10/11/10

405 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 9-19, Regan Fall 2010 Mitglied von Cal Poly, Team 9-19, Regan Fall 2010

CPSU-REGAN-F10S9G19

4 Mitglieder

14 Anleitungen geschrieben

9 Kommentare

thanks its very useful forme

srikrishnan2003 - Antwort

thank you, very useful for my old camera :)

agungsp2000 - Antwort

Perfect! I never even knew I had this battery in there. Couldn't figure out why the date and time wouldn't stay set every time I shut it off. And then I found the answer here.

Thank you very much for the post!

sherlock261 - Antwort

I'm a senior citizen and am not very good with modern technology. Been going crazy trying to set my clock in my digital camera. I didn't want to buy a new one because I have had this one for years (Power Shot A590) and didn't want to have to learn to use a newer one. Finally got smart enough to do a google search for an answer. Will get a new battery tomorrow and solve my problem. Thanks for the help!...the information age is good for something after all.

Pat Solomon - Antwort

Wow this is a great site. I got the answer I needed right away. The instructions were clear, simple and correct. Thank you.

You are bookmarked.

jeffrey wales - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 35

Letzte 30 Tage: 128

Insgesamt: 14,508