Zum Hauptinhalt wechseln

Dell OptiPlex GX260 Optical Drive Replacement

Was du brauchst

  1. Dell OptiPlex GX260 Optical Drive Replacement, Case: Schritt 1, Bild 1 von 2 Dell OptiPlex GX260 Optical Drive Replacement, Case: Schritt 1, Bild 2 von 2
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

  2. Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: Schritt 2, Bild 1 von 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: Schritt 2, Bild 2 von 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: Schritt 2, Bild 3 von 3
    • Identify the optical drive in the case.

    • Remove the analog audio cable from the optical drive.

    • Remove the IDE cable form the optical drive by pulling straight up on the orange plastic tab..

    • Remove the power cable from the optical drive.

  3. Dell OptiPlex GX260 Optical Drive Replacement: Schritt 3, Bild 1 von 1
    • Push the two green tabs toward each other to release the optical drive and lift it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 4-48, Amido Fall 2010 Mitglied von Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 Mitglieder

27 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 8

Insgesamt: 8,838