Zum Hauptinhalt wechseln

Canon PowerShot SD800 IS LCD Assembly Replacement

Was du brauchst

  1. Canon PowerShot SD800 IS LCD Assembly Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Remove one 2.25mm screw on the bottom.

  2. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 2, Bild 1 von 1
    • Remove two 2.25mm screws on the right side looking from the front.

  3. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 3, Bild 1 von 1
    • Remove one 4.7mm screw on the side with the AV output.

  4. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 4, Bild 1 von 1
    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

  5. Canon PowerShot SD800 IS LCD Assembly Replacement, LCD Assembly: Schritt 5, Bild 1 von 1
    • Remove 2 2.4mm screws on bottom.

  6. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 6, Bild 1 von 1
    • Follow the small data cable to where it connects to the camera.

    • Lift the back white portion to unlock the cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

  7. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 7, Bild 1 von 1
    • Gently lift LCD display off.

    • There will be two data cables still attached to the camera. Do not break them.

    • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

  8. Canon PowerShot SD800 IS LCD Assembly Replacement: Schritt 8, Bild 1 von 1
    • Follow the larger cable to where it connects to the camera.

    • Lift the front black portion of the connector to unlock the data cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Jeremy Rabaino

Mitglied seit: 10/10/10

135 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 20-9, Maness Fall 2010 Mitglied von Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Mitglieder

6 Anleitungen geschrieben

Ein Kommentar

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 2,275