Zum Hauptinhalt wechseln

Sega CD Plastic Housing Removal

Was du brauchst

  1. Sega CD Plastic Housing Removal, Sega CD Plastic Housing Removal: Schritt 1, Bild 1 von 2 Sega CD Plastic Housing Removal, Sega CD Plastic Housing Removal: Schritt 1, Bild 2 von 2
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. Sega CD Plastic Housing Removal: Schritt 2, Bild 1 von 1
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. Sega CD Plastic Housing Removal: Schritt 3, Bild 1 von 1
    • Slide the lock tab to the left to separate the halves of the console.

  4. Sega CD Plastic Housing Removal: Schritt 4, Bild 1 von 1
    • Lift from the left side to remove the top of the case.

  5. Sega CD Plastic Housing Removal: Schritt 5, Bild 1 von 1
    • Using the spudger, pry the cover off of the Genesis attachment.

  6. Sega CD Plastic Housing Removal: Schritt 6, Bild 1 von 1
    • Lift the top of the case to remove the cover.

  7. Sega CD Plastic Housing Removal: Schritt 7, Bild 1 von 1
    • Remove the faceplate by pulling it up, then out.

Abschluss

To reassemble the device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Cal Poly, Team 5-14, Maness Fall 2010 Mitglied von Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 7

Insgesamt: 4,875