Zum Hauptinhalt wechseln

Sega CD CD Tray Replacement

Was du brauchst

  1. Sega CD CD Tray Replacement, Sega CD Plastic Housing Removal: Schritt 1, Bild 1 von 2 Sega CD CD Tray Replacement, Sega CD Plastic Housing Removal: Schritt 1, Bild 2 von 2
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. Sega CD CD Tray Replacement: Schritt 2, Bild 1 von 1
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. Sega CD CD Tray Replacement: Schritt 3, Bild 1 von 1
    • Slide the lock tab to the left to separate the halves of the console.

  4. Sega CD CD Tray Replacement: Schritt 4, Bild 1 von 1
    • Lift from the left side to remove the top of the case.

  5. Sega CD CD Tray Replacement: Schritt 5, Bild 1 von 1
    • Using the spudger, pry the cover off of the Genesis attachment.

  6. Sega CD CD Tray Replacement: Schritt 6, Bild 1 von 1
    • Lift the top of the case to remove the cover.

  7. Sega CD CD Tray Replacement: Schritt 7, Bild 1 von 1
    • Remove the faceplate by pulling it up, then out.

  8. Sega CD CD Tray Replacement, CD Tray: Schritt 8, Bild 1 von 2 Sega CD CD Tray Replacement, CD Tray: Schritt 8, Bild 2 von 2
    • Remove metal plate by unscrewing the three screws with the Phillips head screwdriver and then lifting the plate.

    • The three screws are shown on the diagram.

  9. Sega CD CD Tray Replacement: Schritt 9, Bild 1 von 2 Sega CD CD Tray Replacement: Schritt 9, Bild 2 von 2
    • Remove the two screws from the plastic bar.

    • The two screws are shown pictured.

  10. Sega CD CD Tray Replacement: Schritt 10, Bild 1 von 2 Sega CD CD Tray Replacement: Schritt 10, Bild 2 von 2
    • To remove the CD tray

    • Remove the four screws with the Phillips head screwdriver.

  11. Sega CD CD Tray Replacement: Schritt 11, Bild 1 von 1
    • Carefully unplug the wire connected to optical reader.

  12. Sega CD CD Tray Replacement: Schritt 12, Bild 1 von 2 Sega CD CD Tray Replacement: Schritt 12, Bild 2 von 2
    • Remove the four screws on the underside of the CD tray with a small Phillips head screwdriver.

    • The four screws are highlighted on the diagram.

    • The four springs below the circuit board are attached to the screws, so be careful not to lose them when you remove the screws.

  13. Sega CD CD Tray Replacement: Schritt 13, Bild 1 von 1
    • Carefully remove the CD tray from circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

sskyllin

Mitglied seit: 10/18/10

21 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 5-14, Maness Fall 2010 Mitglied von Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 8

Letzte 30 Tage: 42

Insgesamt: 9,551